Department of Mechanical Engineering (ME)

Brigadier General Md Humayun Kabir Bhuiyan, psc

Dean, Faculty of ME, Department of Mechanical Engineering (ME)

ACADEMIC EXPERIENCE

PhD in Mechanical Engineering (Ongoing)
Year Enrolled: April 2015
Military Institute of Science and Technology (MIST)

MSc in Mechanical Engineering
Year Obtained: 2003
Bangladesh University of Engineering and Technology (BUET)

BSc in Mechanical Engineering
Year Obtained : 1999
Bangladesh University of Engineering and Technology (BUET)

 

TEACHING EXPERIENCE

(1) Senior Instructor and Head
September 2018 to Till date, ME Department, MIST

(2) Instructor Class A
July 2018 to September 2018, ME Department, MIST

(3) Instructor Class A
August 2013 to 2015, ME Department, MIST

 

 

THEORETICAL COURSES CONDUCTED

(1) Introduction to mechanical Engg (level 1 term 1, ME Dept)
(2) Basic Mechanical Engineering (level 1 term 1, CSE Dept)
(3) Thermodynamics ((level 2 term 1, ME Dept)
(4) Metallic material (level 2 term 2, ME Dept)
(5) Numerical Analysis (level 2 term 2, ME Dept)
(6) Instrumentation and measurement (level 3 term 1 , ME Dept)
(7) Robotics (level 4 term 1 , ME Dept)
(8) Mechatronics (level 4 term 2 , ME Dept)
(9) Automobile Engineering (level 4 term 2 students)
(10) Fluidics (level 4 term 2 students)

(11) Combustion and Pollution (Level 4 term 1 students)

 

SESSIONAL COURSES CONDUCTED

(1) Numerical Analysis with MATLAB ((level 2 term 1, ME Dept -BMA)
(2) Thermodynamics ((level 2 term 1, ME Dept)
(3) Metallic material (level 2 term 2, ME Dept)
(4) Instrumentation and measurement (level 3 term 1 , ME Dept)
(5) Heat transfer (level 3 term 2 , ME Dept)
(6) Internal combustion Engine (level 4 term 2 students)

 

PROJECT / THESIS SUPERVISED FOR UNDERGRADUATE STUDENTS

(1) Design and fabrication of fuel cell -2013
(2) Design and fabrication and improvement of biomass cooking stoves-2014
(3) Design and fabrication of small arms and military optical eqipment preservation room-2018
(4) Design and development of Injection molding machine-2019 (running)
(5) Design and development of subsonic wind tunnel -2019 (running)
(6) Design and development of military hovercraft-2019 (running)
(7) Design and development of closed wind tunnel-2019 (running)
(8) Design and development of armoured personal carrier hull- 2019 (running)
(9) Design and development of refrigeration system- 2018
(10) Fabrication of Automotive vehicle training aid- 2015

 

LIST OF PUBLICATIONS

(1) Bhuiyan M H K and Islam M Q, ‘ Static torque and drag characteristics of a four bladed Savonius Rotor and Prediction of dynamic Characteristics”, Proceeding of 2nd BSME-ASME International Conference of Thermal Engineering” 2-4 January 2004, pp 938-946

(2) Islam, M, Q, Hasan, M S, Bhuiyan H K, “ An experimental Investigation of a Statrionary , 4 Bladed Savonius Rotor”. Proceeding of 4th International Mechanical Engineering Conference and 9th annual Paper Meet, IEB,, 29-31 December 2004, Dhaka, Bangladesh.

(3) Islam, M. Q., Bhuiyan, M.H.K. and Chowdhury, F. H., 2003, “Aerodynamic Characteristics of a Stationary Four Bladed Savonius Rotor”, Journal of Energy, Heat and Mass Transfer, Vol. 25, pp. 205- 215.

(4) Md. Mahmoodul Haque, Imteaz Osmani, Md. Asad Hossain, Md. Mominul Haque and Lt. Col. Humayun Kabir Bhuiyan, “Fabrication of a biomass stove and conversion of electricity from waste heat using TEG”, First Internation Conference on Mechanical Engineering and Applied Science(ICMEAS-2017), MILITARY INSTITUTE OF SCIENCE & TECHNOLOGY, MIRPUR CANTT, DHAKA-1215

(5) Lt Col Md Humayun Kabir Bhuiyan, ‘How to prevent weapon and Fire Control Instrument from corrosion and fungal degradation’, 2017, Special write in Bengoli on EME Centre and School EME Corp Reuninon Magazine 2018.

(6) M. Nasir Uddin, Md. Humayun Kabir Bhuiyan, Dr. Golam Mostofa, ‘An Experimental Investigation of Long-Range Projectiles under Different Wind Conditions’, American Journal of Mechanical Engineering, 2021, Vol. 9, No. 1, 7-17.